Question 1

What size C16 rafter do I need in the UK?

Accepted Answer

C16 rafters are typically supplied in 90×45, 120×45, 140×45, 190×45 and 240×45 mm sections. The correct size depends on span, spacing and load — verify against TRADA published Eurocode 5 (BS EN 1995-1-1) span tables and your structural engineer's calculations for Building Control approval under Part A.

Question 2

What spacing should C16 rafters be installed at in the UK?

Accepted Answer

UK rafters are typically installed at 450 or 600 or 900 mm centres. 400 mm centres are the most common in residential construction and align with standard 1200 mm wide plasterboard sheets.

Question 3

Does C16 timber comply with UK Building Regulations?

Accepted Answer

Yes — C16 Softwood is a recognised strength class under BS EN 338 and is widely used to demonstrate compliance with Part A of the Building Regulations (Structure) in England & Wales when sized to TRADA Eurocode 5 span tables or by an engineer's calculation. Equivalent provisions apply under Section 1 of the Scottish Technical Handbook and Part D in Northern Ireland. NHBC Standards Chapter 6.4 sets the practical specification baseline for warranty providers.

C16 rafters span tables (UK)